Waterproofing is nothing but the process of protecting any material or structure from water or being water resistant. These days, you can find a wide range of materials which are said to be resistant to water. In fact, they are already available in the market and are used as house wares or products. These products can also be used underwater or on wet surfaces to specified levels.
This kind of protection is very necessary for various kinds of structures like homes, basements, workshops, office spaces and many more. Some of the main reasons that cause waterproofing are excessive moisture, condensation, seepage, condensation, rain, ice and snow etc. Of these, the most common water-resistant materials are vinyl, rubber and concrete coatings.
The benefits of waterproofing are numerous. It prevents the growth of mold and mildew, which can cause allergies, asthma and other health disorders. You can avoid further damage to your interior by eliminating the moisture and condensation and so on. It prevents the formation of mold and mildew by eliminating the chances of their formation, cracking and expanding due to constant moisture and temperature fluctuations and so on.
The most common waterproofing practices include physical, chemical and hydrostatic pressure. Physical protection is achieved by using a membrane, either physical or chemical, which acts as a barrier. It is usually made of a synthetic material like plastics, foams, plastics, resins, and drywall. If the physical coating begins to crack, it can be easily replaced.
Hydrostatic pressure can be caused by leakages, seepage, fractures, clogs, gashing and so on. Waterproofing based on hydrostatic pressure is relatively easy. All you have to do is to detect the area of leakage. Once you find the area, you need to dig holes for placement of the ditches. These ditches should be as deep as possible to accommodate the footer drain pipes. Then you should place the waterproofing materials or the liner in the holes so as to form an impermeable barrier against the leakage and other damages.
There are two common types of waterproofing which are discussed below. The most common form is the installation of a sheet concrete slab, which forms an impermeable barrier to all water coming in contact with the wall. Another form of waterproofing is done by means of plastic membranes that are placed beneath the surface of the soil and block any moisture from coming in contact with the floor, wall or ceiling. This type of waterproofing provides better protection than the concrete.
A problem that often occurs in homes is the leakage of the attic, which may occur due to age of the house structure, settling of the soil, settling of the foundation or due to the growth of vegetation. In such a situation, the most popular method of waterproofing the attic is by using positive-side systems. Positive-side systems are installed in the area where there is a possible leak of water from the wall. As a result, a part of the soil is excavated and filled using a skid. On the other hand, the area around the skid is then excavated using a negative-side system.
Waterproofing systems are used for several purposes. In order to prevent the growth of mold, it is important to check the conditions of roof, floor and walls regularly. If you find any sort of damage, then you should use the appropriate system to waterproof the walls. Waterproofing failures can lead to major structural problems and cause health problems for the inhabitants of your home.
In case of houses with older structures, then the chances of moisture absorption are more. Waterproofing becomes all the more important to these houses since they are more at risk of mold contamination. In fact, mold spores contaminate the entire place. The only way to completely eradicate mold is by waterproofing the walls. Waterproofing is also necessary to protect the structure of the basement, which remains the most contaminated area after structural damage. In addition, it can also be used to prevent deterioration of floors.
Waterproofing is done using special equipment like the sump pump. Waterproofing using this equipment helps in stopping the sump flow. Waterproofing prevents the entry of excess water and effectively stops leaks. This also helps in avoiding the growth of molds in basements and attics.
Moreover, the other important thing that must be done to make a home more secure is to repair the cracks in the foundation walls, the foundation. Cracks or breaches in the foundation walls may result in moisture absorption. A waterproofing agency can help you in repairing the foundation, if required. They know all the requirements for waterproofing a house and give reasonable price quotations. To learn more about waterproofing in a home, you can browse the internet or go for a home visit.