Basement waterproofing protects your basement walls from external water damage. Waterproofing is protection for the structure, and if any issues can develop in the near future, waterproofing will take care of them. When water begins to come through the cracks in your basement walls, or somewhere else in the structure, pressure is beginning to build within and above the foundation walls of the house. If left unchecked, this can lead to cracking and eventual failure. Once you have waterproofed your basement properly, you can be confident that it will be around for many years to come.
One way of waterproofing your basement effectively, without needing to carry out foundation repair or basement waterproofing is with floating floors. Basically, these are the floating floors that are connected to the concrete slab. The top layer is simply timber, or pre-fabricated material. This then has a layer of gravel poured directly onto it to form the sealant and give the concrete structure some added protection. This is just one application, however – the concrete and gravel layers can be combined as many times as necessary to ensure that you never miss a spot.
Another very effective method for waterproofing your basement is by applying what is known as internal waterproofing. Internal waterproofing works by stopping the water from running inside your basement. To do this, the basement leaks must all be located within the interior, not just the exterior. There are two main ways to apply internal waterproofing to your basement, which both work very well. One method involves excavating the basement walls and pouring a liquid membrane into place, while the other involves using a special rubberized membrane.
Recently, I was asked by an individual who wanted to know if there was a new product on the market today that would help solve his basement waterproofing problem. He was quite interested, because he was having major problems with the leaking basement floor, which had been going on for quite some time. I’ll tell you what his problem was, as well as which basement waterproofing products have worked the best for me in the past.
His leaking basement floor was due to a combination of factors. First, the living space was leaking where the windows were located. It was only a matter of time before the water would damage the wood framing surrounding the house, which would allow the outside to seep in as well. The second cause was the poor drainage around the home. It turns out that we have a problem with ground water that actually runs through a number of underground pipes here in our household. While this is not a serious problem by itself, if those pipes become completely clogged with accumulated sludge, all of the water that was supposed to run below the floor level will be flushed away along with whatever is down there, including your basement waterproofing products.
Fortunately, lowering the entire basement floor is one of the basement waterproofing solutions available today. This is done using a special liquid membrane that is applied to the floor area in a process similar to applying an epoxy coating to a car’s hood. Basement waterproofing contractors can apply it for you can hire someone who has the expertise to do it for you. Either way, make sure you follow the manufacturer’s directions when it comes to applying it and be careful to only hire a reputable company to perform this service.
Many basement waterproofing products will include a sealing compound that is designed to prevent moisture from seeping into the concrete and supporting components of the structure beneath. Unfortunately, many homeowners neglect to use these compounds, which leaves the area prone to more water damage over time. Many basement waterproofing systems are also designed to allow liquid to seep through the structure of the walls and floor, but many homeowners do not make this important point. If you don’t seal the area, you may end up with a leaky foundation in just a few years. However, if you do seal the area, you can keep your foundation dry for many more years.
Basement waterproofing systems are designed to prevent water from seeping into the walls and floor of a basement. Unfortunately, many homeowners fail to make this important point or are unaware of the need to do so. Foundation creep is often a problem with basements, and it can lead to a dangerous buildup of mold if not fixed promptly. By sealing your basement properly, you can limit the amount of time your foundation will be exposed to water.